96W to 480W Dimmable Class II Transformers Suitable for 24V AC LED Strips
These transformers are suitable for the following Dreamscape Lighting Fixtures:
DLED-5000, DLED-5100, DLED-5200, DLED-5300, DLED-5400, DLD-5500, DLED-5900, DLED-6000AC
96 WATT DL-1111-24- 120/24 Volt AC – 1- 4 Amp breaker
- ETL Listed
- Maximum Load: 24’ for 5100, 6000AC
- 36’ for 5000
- H: 6-3/4”, W: 5”, D: 4-3/4”
- 120/24 Volt AC – 2- 4 Amp breakers
- ETL Listed
- Maximum Load: 48’ for 5100, 6000AC
- 72’ for 5000
- H: 6-3/4”, W: 5”, D: 4-3/4”
- 120/24 Volt AC – 3- 4 Amp breakers
- ETL Listed
- Maximum Load: 72’ for 5100, 6000AC
- 108’ for 5000
- H: 6-3/4”, W: 5”, D: 4-3/4”
- 120/24 Volt AC – 5 – 4 Amp breakers
- ETL Listed
- Maximum Load: 120’ for 5100, 6000AC
- 180’ for 5000
- H: 8-3/8”, W: 5-3/4”, D: 4-7/8″
NOTE: Dimmers used must be approved for magnetic loads and use direct current or voltage regulation, such as Lutron Diva Series. Dimmers that use phase dimming technology must have a neutral. Check with factory for compatibility.
SAFETY NOTE: Secondary protection is important for safety. Feed wires from products boards need secondary protection because the small gauge of the feed wire off the boards could melt before a primary protected only breaker would trip.