

20W to 40W Dimmable Class II Transformers Suitable for 24V AC LED Strips
These transformers are suitable for the following Dreamscape Lighting Fixtures:
DLED-5000, DLED-5100, DLED-5200, DLED-5300, DLED-5400, DLED-5500, DLED-5900, DLED-6000AC
20 WATT DLM20-L-24- 120/24 Volt AC
- ETL Listed
- Maximum Load: 5’ for 5100, 8′ for 5000
- 36’ for 5000
- H: 5-1/8”, W: 2-1/8”, D: 2”
- 120/24 Volt AC
- ETL Listed
- Maximum Load: 10’ for 5100, 16′ for 5000
- H: 5-1/8”, W: 2-1/8”, D: 2”
NOTE: Dimmers used must be approved for magnetic loads and use direct current or voltage regulation, such as Lutron Diva Series. Dimmers that use phase dimming technology must have a neutral. Check with factory for compatibility.
SAFETY NOTE: Secondary protection is important for safety. Feed wires from products boards need secondary protection because the small gauge of the feed wire off the boards could melt before a primary protected only breaker would trip.